Spectra Logic Fibre Channel TapeSAN for Cisco

 

Data ONTAP 7.2.x Solution Information

Spectralogic/Cisco TapeSAN Solutions for:

The Spectra Logic solutions for fibre channel tapeSAN are listed below. All components are described in the table below. For information about switch configurations, please visit our Cisco switch page.

Data ONTAP7.2.x
PlatformsNetApp platforms: F800, FAS900 Series, FAS270, FAS2000, FAS3000, FAS6000 series
V-Series (formerly gFiler): GF825, GF900 Series
NearStore: R100, R150, R200
Adapter CardsQlogic 2200, 2212, 2342
LSI 929, 949
SwitchCisco 9120, 9140 (min fw 1.3(4a))
Cisco 9216 (min fw 1.3(4a))
Cisco 9506, 9509 (min fw 1.3(4a))
Cisco 9513 (min fw 3.1.2)
NDMP Backup Applications
Symantec NetBackupNetBackup 5.9,6.0, with Data ONTAP 7.2.1
NetBackup 6.5 with Data ONTAP7.2.2 & 7.2.3
IBM Tivoli Storage Manager6.5 with Data ONTAP 7.2.2 & 7.2.3
5.4 with Data ONTAP 7.2.2 & 7.2.3
EMC Networker7.2.1 with Data ONTAP 7.2
CommVault Galaxy QiNetix6.1 with Data ONTAP 7.2
Oracle Secure Backup10.1.0.3 with Data ONTAP 7.1.1.1 & 7.2.1
BakBone NetVaultNV 7.1.1 with Data ONTAP 7.0
NV 7.4.5 with Data ONTAP 7.2
NV 7.4.5 with Data ONTAP 7.2.2
SymantecBackupExec 11d with DOT 7.0*
Hewlett PackardData Protector 6.0 with 7.2.2
Library

Spectra Logic T950

tape devicesQuantum SDLT 600min fw v50
Quantum SDLT 320min fw v82
Sony SAIT SDZ-100min fw 0201_j07p
IBM Ultrium TD-2min fw 4770
IBM Ultrium TD-3min fw 5480
bridgeSpectra Logic F-QIPmin fw 5.4.0.5

Spectra Logic T380

tape devicesLTO-2 (IBM TotalStorage 3580 Ultrium 2)min fw 5AT0
LTO-3 FIBRE (IBM TotalStorage 3580 Ultrium 3)min fw 6BA0
LTO-3 SCSI (IBM TotalStorage 3580 Ultrium 3)min fw 6BA0
LTO-4 SCSI (IBM TotalStorage 3580 Ultium 4)min fw 79M1
LTO-4 Fibre (IBM TotalStorage 3580 Ultium 4)min fw 77BA

Spectra Logic T200

tape devicesLTO-2 (IBM TotalStorage 3580 Ultrium 2)min fw 5AT0
LTO-3 FIBRE (IBM TotalStorage 3580 Ultrium 3)min fw 6BA0
LTO-3 SCSI (IBM TotalStorage 3580 Ultrium 3)min fw 6BA0
LTO-4 SCSI (IBM TotalStorage 3580 Ultium 4)min fw 79M1
LTO-4 Fibre (IBM TotalStorage 3580 Ultium 4)min fw 77BA

Spectra Logic T120

tape devicesSony SAIT SDZ-100min fw 0201_j07p
IBM Ultrium TD-2min fw 4770
IBM Ultrium TD-3min fw 5480
bridgeSpectra Logic F-QIPmin fw 5.4.0.5

Spectra Logic T50

tape devicesIBM Ultrium TD-3min fw 5480
bridgeSpectra Logic F-QIPmin fw 5.4.0.5

Spectra Logic 12K, 20K, 64K

media changermin fw 20005
tape devicesAIT3 SDX-700Cmin fw 0207_0012
AIT4 SDX-900Vmin fw 0100_0062
AIT3 SDX-700Vmin fw 0100_j34v
AIT1 SDX-300C, SDX-400Cmin fw 04C7
AIT2 SDX-500Vmin fw 0101_j15v
AIT2 SDX-500Cmin fw0205_1006
bridgeSpectra Logic F-QIPmin fw 4.1.37.5
notesLibrary can be set up as Loop mode or Fabric mode.
Library does not need Hard Addressing enabled.
Up to 8 AIT-3 drives can be configured in a 12K,20K
Up to 16 AIT-3 drives can be configured in a 64K
One F-QIP controls up to four AIT-3 drives
Required Setup
Notes
  • ** Spectra Logic supports major FC switch vendors with FC drives attached to Spectra Logic Libraries this page reflects a general support position from Spectra Logic and not all equipment has been through a TapeSan Certification process
  • The libraries above are also supported in direct connect configurations (no switch) however in that case, library must be set to hard addressing, and loop mode.
  • ** The FAS250 Platform is only supported with DataONTAP 6.4.1 and later; and only supports a copper connection — direct connect or through the 24/2800 family of switches only.