ADIC Fibre Channel TapeSAN with Cisco

    Data ONTAP 7.1 and 7.0 Solution Information

    ADIC/Cisco TapeSAN Solutions for:

    The ADIC solutions for fibre channel tapeSAN are listed below. All components are described in the table below. For information about switch configurations, please visit our Cisco switch page.


    Data ONTAP7.0 and 7.1
    PlatformsNetApp platforms: F800, FAS900 Series, FAS270 V-Series (formerly gFiler): GF825, GF900 Series NearStore: R100, R150, R200
    Adapter CardsQlogic 2342
    SwitchCisco 9120, 9140 (min fw1 .3(4a))
    Cisco 9216 (min fw1 .3(4a))
    Cisco 9506, 9509 (min fw1 .3(4a))
    Library

    ADIC Scalar 100

    media changermin fw 2.6.0
    tape devicesDLT8000min fw 0250
    SDLTmin fw v36
    AIT2min fw 010b
    IBM LTOmin fw 18N0
    IBM LTO3min fw 54K1
    bridgesADIC SNC 3000min fw 3.41.38
    ADIC SNC 5101min fw 4.04.05
    NDMP appsVeritas Netbackup 3.4.1, 4.5, and 5.0
    Legato 6.1
    notesDLT8000 requires lib fw 2.6.1

    ADIC Scalar 1000, Scalar 10k

    media changermin fw 4.1.1
    tape devicesDLT8000min fw 0250
    SDLTmin fw v36
    AIT2min fw 010b
    IBM LTOmin fw 18N0
    IBM LTO3min fw 54K1
    bridgesADIC SNC3000min fw 3.41.38
    ADIC SNC5100min fw 4.04.05
    NDMP appsVeritas Netbackup 3.4.1, 4.5, and 5.0
    Legato 6.1
    notesAIT2/DLT8000 requires min lib fw 3.0.3

    ADIC Scalar i2000

    media changermin fw i2
    tape devicesIBM LTO2min fw 4772
    IBM LTO3min fw 54K1
    bridgeADIC IO Blademin fw 4.44.15
    NDMP apps- Veritas Netbackup 5.0
    notes- Control LUN must be mapped after all drive and library LUNs