Spectra Logic Fibre Channel TapeSAN for QLogic

Data ONTAP™ 7.2.x Solution Information

The Spectra Logic solutions for fibre channel tapeSAN are listed below. All components are described in the table below. For information about switch configurations, please visit our QLogic switch page.

Data ONTAP 7.2.x
Platforms NetApp platforms: F800, FAS900 Series, FAS270, FAS2000, FAS3000, FAS6000 series
V-Series (formerly gFiler): GF825, GF900 Series
NearStore: R100, R150, R200
Adapter Cards Qlogic 2340,2342,2312
LSI 929, 949
Switch Qlogic SANbox 560x (min fw5.0.1.10.0)
Qlogic SANbox 9000
Qlogic 1400
Qlogic 5200
Qlogic 3050
NDMP Backup Applications
Symantec NetBackup NetBackup 5.9,6.0, with Data ONTAP 7.2.1
NetBackup 6.5 with Data ONTAP7.2.2 & 7.2.3
IBM Tivoli Storage Manager 6.5 with Data ONTAP 7.2.2 & 7.2.3
5.4 with Data ONTAP 7.2.2 & 7.2.3
EMC Networker 7.2.1 with Data ONTAP 7.2
CommVault Galaxy QiNetix 6.1 with Data ONTAP 7.2
Oracle Secure Backup 10.1.0.3 with Data ONTAP 7.1.1.1 & 7.2.1
BakBone NetVault NV 7.1.1 with Data ONTAP 7.0
NV 7.4.5 with Data ONTAP 7.2
NV 7.4.5 with Data ONTAP 7.2.2
Symantec BackupExec 11d with DOT 7.0*
Hewlett Packard Data Protector 6.0 with 7.2.2
Library

Spectra Logic T950

tape devices Quantum SDLT 600 min fw v50
Quantum SDLT 320 min fw v82
Sony SAIT SDZ-100 min fw 0201_j07p
IBM Ultrium TD-2 min fw 4770
IBM Ultrium TD-3 min fw 5480
bridge Spectra Logic F-QIP min fw 5.4.0.5

Spectra Logic T380

tape devices LTO-2 (IBM TotalStorage 3580 Ultrium 2) min fw 5AT0
LTO-3 FIBRE (IBM TotalStorage 3580 Ultrium 3) min fw 6BA0
LTO-3 SCSI (IBM TotalStorage 3580 Ultrium 3) min fw 6BA0
LTO-4 SCSI (IBM TotalStorage 3580 Ultium 4) min fw 79M1
LTO-4 Fibre (IBM TotalStorage 3580 Ultium 4) min fw 77BA

Spectra Logic T200

tape devices LTO-2 (IBM TotalStorage 3580 Ultrium 2) min fw 5AT0
LTO-3 FIBRE (IBM TotalStorage 3580 Ultrium 3) min fw 6BA0
LTO-3 SCSI (IBM TotalStorage 3580 Ultrium 3) min fw 6BA0
LTO-4 SCSI (IBM TotalStorage 3580 Ultium 4) min fw 79M1
LTO-4 Fibre (IBM TotalStorage 3580 Ultium 4) min fw 77BA

Spectra Logic T120

tape devices Sony SAIT SDZ-100 min fw 0201_j07p
IBM Ultrium TD-2 min fw 4770
IBM Ultrium TD-3 min fw 5480
bridge Spectra Logic F-QIP min fw 5.4.0.5

Spectra Logic T50

tape devices IBM Ultrium TD-3 min fw 5480
bridge Spectra Logic F-QIP min fw 5.4.0.5

Spectra Logic 12K, 20K, 64K

media changer min fw 20005
tape devices AIT3 SDX-700C min fw 0207_0012
AIT4 SDX-900V min fw 0100_0062
AIT3 SDX-700V min fw 0100_j34v
AIT1 SDX-300C, SDX-400C min fw 04C7
AIT2 SDX-500V min fw 0101_j15v
AIT2 SDX-500C min fw0205_1006
bridge Spectra Logic F-QIP min fw 4.1.37.5
notes Library can be set up as Loop mode or Fabric mode.
Library does not need Hard Addressing enabled.
Up to 8 AIT-3 drives can be configured in a 12K,20K
Up to 16 AIT-3 drives can be configured in a 64K
One F-QIP controls up to four AIT-3 drives
Required Setup
Notes
  • ** Spectra Logic supports major FC switch vendors with FC drives attached to Spectra Logic Libraries this page reflects a general support position from Spectra Logic and not all equipment has been through a TapeSan Certification process
  • The libraries above are also supported in direct connect configurations (no switch) however in that case, library must be set to hard addressing, and loop mode.
  • ** The FAS250 Platform is only supported with DataONTAP 6.4.1 and later; and only supports a copper connection — direct connect or through the 24/2800 family of switches only.