V-Series Series Technical Specifications – V6210/40/80 & V3270/50/20 Products

View specifications for:
V6200 Series
Specification [1] V6210 V6240 V6280
General Specifications

Refer to specifications for the corresponding FAS model at this location:
FAS6200 Tech Specs

Maximum System Capacity 3,600TB[7] 4,320TB[7] 4,320TB[7]
Max # of LUNs and NetApp Drives[3] 1,200 1,440 1,440
Flash Cache Intelligent Caching 3TB maximum 6TB maximum
1TB standard in base systems
16TB maximum
1TB standard in base systems
Supported Storage Arrays[4] Selected FC-SAN storage arrays from EMC, HDS,IBM
Supported NetApp Disk Shelves[5] DS2246, DS4243,DS4246,DS4486
RAID Support Attached storage arrays: Data protection must be provided using RAID that is native to the storage array. V-Series will stripe (RAID 0) across storage array LUNS for performance only.
NetApp disk drives: RAID 4, RAID-DP, RAID 4 + SyncMirror (RAID 1), RAID-DP + SyncMirror


V3200 Series
Specification [1] V3220 V3250 V3270
General Specifications

Refer to specifications for the corresponding FAS model at this location:
FAS3200 Tech Specs

Maximum System Capacity 1,440TB[7] 2,160TB[7] 2,880TB[7]
Max # of LUNs and NetApp Drives[3] 480[6] 720 960
Supported Storage Arrays[4] Selected FC-SAN storage arrays from EMC,HDS,IBM
Supported NetApp Disk Shelves[5] DS2246, DS4243,DS4246, DS4486
RAID Support Attached storage arrays: Data protection must be provided using RAID that is native to the storage array. V-Series will stripe (RAID 0) across storage array LUNS for performance only.
NetApp disk drives: RAID 4, RAID-DP, RAID 4 + SyncMirror (RAID 1), RAID-DP + SyncMirror


SAN Switches for Connectivity Between V-Series and Storage arrays
Switch Vendors Brocade, Cisco

See the V-Series Support Matrix for a current listing of
supported switch models and configurations. [4]

www.netapp.com/us/media/v-series-supportmatrix.html

[1] All specifications are for dual active-active controller configurations. Divide numbers by two to get specifications for single controllers.
[3]Maximum includes both LUNs provisioned from storage arrays to the V-Series controllers plus attached NetApp disk drives if combined in the same system.
[4]Access to the V-Series Support Matrix is limited to NetApp employees, partners, and existing customers.
[5]Data ONTAP® 7.3 or later is required to support NetApp disk drives with V-Series.
[7]3TB disk drives supported with Data ONTAP 8.0.2 or later.