| NetApp VTL System Software |
VTL OS v5.x with hardware compression (Note: VTL OS 6.x is no longer recommended for new deployments). |
| Standard Software Features |
Multiple virtual drives, multiple virtual libraries, built-in data mover for direct VTL-to-physical tape creation, Tape Smart Sizing, Shadow Tapes, and AutoSupport. |
| Hardware Features |
Dual-core processors, built-in hardware compression, 4 GB/s Fibre Channel ports onboard, full-duplex 10/100/1000 Base-T Ethernet management port, Compact Flash, redundant hot-plug cooling fans, redundant hot-plug power supplies, 19" rack-mount enclosure, optional 220V 42U 19" system cabinet. |
| RAID Protection |
VTL-RAID (single parity). For maximum data protection, all backups to the VTL should be copied to physical tape. |
| Hot Spares Drives |
User defined global hot spare drives. |
| Capacity Expansion Option |
DS14mk2 disk shelf with 1 TB SATA drives. |
|
| |
| Guidelines for Maximum Weekly Ingest of Backup Data |
|
|
|
| VTLOS 5.x, no tape creation |
150 TB/wk |
315 TB/wk |
630 TB/wk |
| VTLOS 5.x, with tape creation |
125 TB/wk |
175 TB/wk |
350 TB/wk |
| VTLOS 6.x with deduplication enabled 3 |
28 TB/wk |
35 TB/wk |
70 TB/wk |
| Peak Aggregate Write Throughput |
|
|
|
| VTLOS 5.x (100% writes) |
600 MB/s |
1150 MB/s |
2300 MB/s |
| VTLOS 5.x (concurrent read/write workload w/50% writes) |
340 MB/s |
650 MB/s |
1300 MB/s |
| VTLOS 6.x (default settings, 100% writes) 3 |
300 MB/s |
380 MB/s |
760 MB/s |
| VTLOS 6.x (default settings, concurrent read/write workload) 3 |
170 MB/s |
215 MB/s |
430 MB/s |
| Peak Single Stream Write Throughput |
|
|
|
| VTLOS 5.x 4 |
100 MB/s |
100 MB/s |
100 MB/s |
| VTLOS 6.x 3, 4 |
70 MB/s |
70MB/s |
70MB/s |
| Peak Aggregate Read Throughput |
|
|
|
| VTLOS 5.x |
450 TB |
900 TB |
1800 TB |
| VTLOS 6.x 3 |
variable |
variable |
variable |
| Maximum Raw Capacity |
55 TB |
275 TB |
550 TB |
| Maximum Effective Capacity |
|
|
|
| VTLOS 5.x with standard compression @ 2:1 |
90 TB |
450 TB |
900 TB |
| VTLOS 6.x with deduplication enabled 3 |
variable |
variable |
variable |
| Maximum Number of Virtual Tapes |
|
|
|
| Displayable in GUI per virtual library |
1000 |
1000 |
1000 |
| Total per system |
10,000 |
10,000 |
20,000 |
| Maximum User Data Per Virtual Tape 4 |
2 TB |
2 TB |
2 TB |
| Maximum Number of Virtual Libraries |
256 |
256 |
512 |
| Maximum Number of Virtual Drives |
1,500 |
1,500 |
1,500 |
| Maximum Concurrent In-use Virtual Drives |
|
|
|
| VTLOS 5.x, no Tape Creation 5 |
90 |
90 |
180 |
| VTLOS 5.x, with Tape Creation 5 |
45 |
45 |
90 |
| VTLOS 6.x with deduplication enabled, no tape creation 3, 5 |
80 |
80 |
160 |
| VTLOS 6.x with deduplication enabled with tape creation 3, 5 |
40 |
40 |
80 |
| Notes |
|
| 1 Specifications provided are based on lab testing of maximum configurations for compression cards, disk shelves and backend ports. Actual results for each customer environment will vary based upon a number of factors. Maximum performance and capacity are calculated using Base10 arithmetic (i.e. 1TB=1,000,000,000,000 Bytes) and data that compresses at a ratio of 2-to-1. |
| 2 A VTL1400 is the equivalent of two, independent VTL700 systems. |
| 3 VTL OS 6.x is a restricted access release and is no longer recommended for new deployments. Space savings from VTL deduplication will vary based on a number of factors and may not provide any benefits versus standard compression, depending upon the environment. Read performance for a system running VTL deduplication will also vary based upon a number variables. |
| 4 Applies to VTL OS releases 5.6.2 and 6.0.3 and higher, only |
| 5 Maximum in-use concurrent virtual drives equals the maximum number of simultaneous backup streams per system and can be affected by use case, configuration settings, and concurrent operations. Maximum values for the tape creation use cases assume that all virtual drives are cloning to physical tape drives concurrently. |
| Disclaimer |
| These specifications are based on internal testing and are not intended to reflect the actual results that can be achieved in any particular user’s environment. NetApp is not responsible for any incidental or consequential damages in connection with the furnishing, application, or use of this information. These specifications are subject to change without notice. |
| |
| AC Power/Current (line voltage for standalone systems depends on local power distribution; system cabinets are 200 to 240 VAC only) |
100 to 240 VAC, 3.83 to 1.75A, 50/60Hz
200 to 240 VAC, 2.00 to 1.75 A, 50/60 Hz |
100 to 240 VAC, 7.66 to 3.50 A, 50/60 Hz |
Thermal Rating
Typical
Maximum |
1233 Btu/hr
1365 Btu/hr |
2466 Btu/hr
2730 Btu/hr |
| Weight |
75 lb (34 kg)
Fully configured |
150 lb (68 kg)
Fully configured |
| Height |
5.12" (13 cm)
3U EIA |
10.6" (26 cm)
6U EIA |
| Width |
19" IEC rack-compliant (17.7", 44.9 cm) |
| Depth |
24" (61 cm) without cable management tray
30" (76.2 cm) with cable management tray |
| Operating Temperature, Altitude, and Relative Humidity |
10° C to 40° C (50° F to 104° F); at </= 3,000 m (at </= 10,000') elevation; 20% to 80% relative humidity, non-condensing (28° C wet bulb temperature) |
| Non-operating Temperature and Relative Humidity |
-40° C to 65° C (-40° F to 149° F); 10% to 95% relative humidity, non-condensing, in original container |
| Operating Acoustic Noise |
= 54 dBA sound pressure (LpA) at normal operating conditions (at 22° C and at sea level) |
| Min. Cabinet Clearances for Airflow |
10" (25.4 cm) in front, 12" (30.5 cm) in rear |
| Min. Service Clearances for Service |
30" (76.2 cm) in front, 30" (76.2 cm) in rear |
| Altitude |
10,000 ft maximum |
|
| |
| Disk Drive Storage Shelf |
DiskShelf14 family - DS14mk2AT; each w/14 low-profile slots for SATA disk drives |
| Disk Drive Storage Shelf Interface |
PCI-based Fibre Channel-Arbitrated Loop (FC-AL) |
| Power Supply/Cooling Fans |
Dual, redundant, hot-pluggable, integrated power supply/fan assemblies (220V/110V) |
| AC Power/Max. Current |
100 to 120 VAC/3.95A; 200 to 240 VAC/1.9A |
| Operating Temperature and Relative Humidity |
10° C to 40° C (50° F to 104° F); 10 % to 95 % relative humidity, noncondensing |
| Nonoperating Temperature and Relative Humidity |
-40° C to 65° C (-40° F to 149° F); 10% to 95 % relative humidity, noncondensing |
| Thermal Rating |
1017 Btu/hr (fully loaded shelf) |
| Operating Acoustic Noise |
49 dBA at 1m at 23° C |
| Dimensions (Height/Width/Depth) |
3U EIA (5.25", 13.3 cm)/19" IEC rack-compliant (17.6", 44.7 cm)/20" (50.85 cm) |
| Weight |
77 lb (35 kg) fully loaded |
|
| |
20 A and 30 A Single Phase Cabinets
20 A Cabinet - Includes 4 Power Cords with NEMA L6-20 or IEC 309 or Australia AS/NZ53123-20 Connectors
30 A Cabinet - Includes 2 Power Cords with NEMA L6-30 or IEC 309 connectors |
20 A Cabinet - 1 controller and 13 DS14-type shelves; 2 controllers and 12 DS14-type shelves
30 A Cabinet - 1 controller and 12 DS14-type shelves; 2 controllers and 11 DS-14 type shelves |
| AC Power |
200 to 240 VAC |
| Current |
20 A Cabinet - mdash;Maximum 32 A total
30 A Cabinet - Maximum 24 A total |
| Dimensions (Height/Width/Depth) |
78.75" (200 cm)/23.6" (60 cm)/37.4" (95 cm) |
| Min. Clearances |
48" (122 cm) front and rear |
| Shipping Height |
90.6" (230 cm) |
| Weight (Empty) |
275 lb (125 kg) |
|
| |
| FAS Safety |
EN 60950, CE, CSA 60950, UL 60950, CB IEC60950-1 (all national deviations), EN60825-1, IRAM, GOST-R, BSMI |
| Disk Shelf Safety |
EN 60950, CE, CSA 60950, UL 60950, CB IEC60950-1 (all national deviations), EN60825-1, IRAM, GOST-R, BSMI |
| Emissions |
FCC Part 15 Class A, ICES-03, CE, MIC, VCCI, AS/NZS CISPR 22, EN55022, EN61000-3-2, EN61000-3-3, CoC (South Africa), BSMI |
| Immunity |
EN 55024 |
|
