FAS3100 Series Technical Specifications

+1-877-263-8277  Contact Sales
Overview Tech Specs Compare
 

View specifications for:
Technical Highlights
Maximum RAID Group Sizes RAID-DP® (high performance RAID 6)
FC: 28 (26 data disks plus 2 parity disks)
SATA: 16 (14 data disks plus 2 parity disks)

RAID 41
FC: 14 (13 data disks plus 1 parity disk)
SATA: 7 (6 data disks plus 1 parity disk)

SyncMirror® (high resiliency RAID 1)
Options:
  1. RAID-DP + RAID 1
  2. RAID 4 + RAID 1
SAN Protocol Support Fibre Channel Protocol (FCP) (8/4/2/1Gb); fabric-attached and direct-attached; IP SAN(iSCSI), Fibre Channel over Ethernet (FCoE)
File Service Protocol Support NFS V2/V3/V4 over UDP or TCP, PCNFSD V1/V2 for (PC) NFS client authentication, Microsoft® CIFS
Other Protocol Support HTTP 1.0, HTTP 1.1 virtual hosts
LUNs Up to 2,048 server host LUNs
FlexVol® Volumes Up to 500 per controller
Volume/Aggregate Size2
 16TB
Snapshot™ Copies
 Up to 127,000
Number of Supported SAN Hosts Up to 12 ports3 per controller configured as front-end (host) connectivity ports
Up to 12 directly connected servers4 (per controller and per active-active configuration)
Up to 256 SAN connected servers (per controller and per active-active configuration)
Supported Configurations
 Highly Available Controller Configurations
Active-active controller with controller failover5, active-active controller with stretch (non switch) MetroCluster, active-active controller with fabric-attached MetroCluster
Highly Available Back-End (Disk) Configurations
Dual-path, multipath HA storage
Reliability Redundant hot-swappable controllers, cooling fans, power supplies, optics, and RJ-45 ports
Management Onboard serial console, diagnostic LED, full-duplex 10/100Base-T Ethernet remote LAN management port with RLM and onboard management interfaces, SNMP, telnet, SSH, HTTP, Web (SSL), host scripting, e-mail alerts
Security
 Virus Protection
Authentication: Kerberos (MIT/Active Directory)
Authorization: LDAP, NIS
Auditing: File access logging
Encryption: IPSec, SSL, SSH, SMB signing
Role-Based Access Control (RBAC)
Disk Shelves Supported and Configurations
 DS14, DS14mk2 FC, DS14mk4 FC, DS14mk2 AT Dual-path
DS4243, MPHA (MultiPath High Availability)
Disk Drive Capacities Supported
 FC: 300GB, 450GB, 600GB
SATA: :  250GB, 500GB, 750GB, 1TB, 2TB
SAS: 300GB, 450GB, 600GB
 
Scalability
FAS3170
FAS3160
FAS3140
  Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller
Maximum Number of Disk Drives 840 840 672 672 420 420
Maximum Raw Capacity (TB) 1680 1680 1344 1344 840 840
Maximum Drives per Back-end (Disk) FC Loop 84 84 84 84 84 84
Memory (ECC) 32GB
 16GB
 16GB
 8GB
 8GB
 4GB
Non volatile Memory 4GB 2GB 4GB 2GB 1GB 512MB

1 RAID-DP is the recommended configuration for drives greater than 144GB.
2 Maximum volume/aggregate size is calculated using base 2 arithmetic (1TB = 240 bytes).
3 Requires Data ONTAP® 7.3.
4 Requires Data ONTAP 7.3.
5 For more information about cluster configurations, refer to http://now.netapp.com/NOW/knowledge/docs/ontap/rel704/html/filer/cluster/index.htm
 
On-board I/O Ports/Slots
FAS3170
FAS3160
FAS3140
  Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller
Fibre Channel Ports
 (target or initiator)		 8 ports
1, 2, or 4Gb
(auto-sensing)
 4 ports
1, 2, or 4Gb
(auto-sensing)
 8 ports
1, 2, or 4Gb
(auto-sensing)
 4 ports
1, 2, or 4Gb
(auto-sensing)
 8 ports
1, 2, or 4Gb
(auto-sensing)
 4 ports
1, 2, or 4Gb
(auto-sensing)
GbE Ports 4 2 4 2 4 2
Expansion Slots 8 4 8 4 8 4
 
I/O Card Support
V3170
V3160
V3140
  Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller
2-Port FC Disk Adapters (max.) 8 4 8 4 8 4
2-Port 4Gb FC Target Adapters (max.) 4 2 4 2 4 2
4-Port 4Gb FC Disk/Tape HBAs (max.) 8 4 8 4 8 4
4-Port 4Gb FC Target Adapter (max6.) 6 3 6 3 6 3
2-Port Ultra320 SCSI Tape HBA 8 4 8 4 8 4
Optional Network/SAN Cards (max.)
 2-Port FC Tape Adapters
 4-Port 1GbE (copper) Cards
 4-Port 1GbE TOE (copper) Cards
 2-Port 10GbE TOE (fiber) Cards
 2-Port 1GbE (copper or fiber) Cards
 2-Port 1Gb iSCSI (copper or fiber) HBA

8
8
8
8
8

8

4
4
4
4
4

4

8
8
8
8
8

8

4
4
4
4
4

4

8
8
8
8
8

8

4
4
4
4
4

4
Dual 10GbE FCoE (copper or fiber) Target (SAN) Adapter (max)1 8 4 8 4 8 4
4port SAS HBA 8 4 8 4 8 4
Performance Acceleration Module
(max cards)		 8 4 8 4 4 2
256GB Flash Cache1,2
(max cards)		 4 2 2 1
512GB Flash Cache1
(max cards)		 4 2

1Requires Data ONTAP 7.3.2 or later, 8.0.1 or later
2Flash Cache is not supported with Data ONTAP 8.1 running on the FAS/V3140 systems
 
Software
Operating System NetApp Data ONTAP
Host Operating Systems Supported Windows® 2000, Windows Server 2003, Windows Server 2008, Windows XP, Linux®, Sun™ Solaris™, AIX, HP-UX, Mac OS, VMware, ESX
Software Features
Standard
RAID manager, including RAID-DP
Snapshot
Fast Boot
NIS
DNS
FilerView®
FlexVol
FlexShare™
Deduplication
Network Data Management Protocol (NDMP)
Maintenance Center
Licensed7
FlexClone®
FlexCache™
MultiStore®
SyncMirror

Protection Software

  SnapMirror®
  SnapRestore®
  SnapVault®
  Open Systems SnapVault
  SnapLock® Compliance
  SnapLock Enterprise
  MetroCluster

Management Software

  SnapManager® for Microsoft Exchange
  SnapManager for Microsoft SQL Server™
  SnapManager for Oracle
  SnapManager for Microsoft SharePoint® Server
  SnapManager for SAP®
  SnapManager for Virtual Infrastructure
  SnapValidator for Oracle
  ApplianceWatch™
  SnapDrive® for UNIX®
  SnapDrive for Windows
  Protection Manager
  CommandCentral™ Storage
  File Storage Resource Manager
  Operations Manager
  Provisioning Manager
  Single Mailbox Recovery

6 Requires Data ONTAP 7.3
7 For more information about available software, refer to http://www.netapp.com/products/software.html.
 
DS14 Disk Drive Storage Expansion Shelf specifications
Storage Expansion Shelves Supported (Fibre Channel, SATA)
 FC:          DDS14mk4 FC
               DS14mk2 FC
SATA:    DS14mk2 AT
All shelves have 14 bays for 3.5" low-profile FC or SATA disk drives
Storage Expansion Shelf to Controller Interface Fibre Channel-Arbitrated Loop (FC-AL)
Storage Expansion Shelf Configurations
 New System Configurations
FC: DS14mk4 FC with ESH4 (Embedded Switched Hub 4) Electronics
SATA: DS14mk2 AT with AT-FCX Electronics

Supported via Upgrade Migrations from Installed Systems
FC: DS14mk4 FC with ESH4 Electronics
DS14mk2 FC with ESH4 or ESH2 Electronics
SATA: DS14mk2 AT with AT-FCX Electronics
Power Supply/Cooling Fans
 Dual, redundant, hot-pluggable, integrated power supply/fan assemblies8
AC Power/Max. Current9
 SATA: 7200 RPM drives: 3.01/1.51/7.4A @ 100VAC/200VAC/-40VDC
FC: 10,000 RPM drives: 3.09/1.56/7.61A @ 100VAC/200VAC/-40VDC
FC: 15,000 RPM drives: 3.96/1.94/10.22ª @ 100VAC/200VAC/-40VDC
Thermal Rating10
 SATA 7200 RPM drives: 1017 BTU/hr
FC: 10,000 RPM drives: 1043 BTU//hr
FC: 15,000 RPM drives: 1394 BTU/hr
Operating Acoustic Noise
 49 dBA sound pressure (LpA) @ normal operating conditions (at 22°C and at sea level)
Dimensions (height/width/depth)
 3 EIA U (5.25", 13.3 cm)/19" IEC rack-compliant (17.6", 44.7 cm)/20" (50.85 cm)
Weight
 77 lb (35 kg) fully loaded

8 For detailed disk shelf specifications, refer to http://now.netapp.com/NOW/knowledge/docs/hardware/NetApp/site/guide11.htm#1792411
9 These numbers represent a single supply on, with fans on high setting at 100V, 200V, -40V DC.
10 Thermal rating, like current, is based on drive type/speed. This value is relatively constant regardless of input voltage, so only one value is required for each.
 
DS4243 Disk Drive Storage Expansion Shelf Specifications
Disk Drive Types and Capacities Supported SAS 15,000 RPM: 300GB, 450GB, 600GB
SATA 7,200 RPM: 500GB, 1TB, 2TB
All shelves have 24 bays for 3.5” low-profile SAS or SATA disk drives
Disk Enclosure to Controller Interface Serial Attached SCSI (SAS) operating at 3Gb, requires PCIe SAS Host Bus Adapter card or available embedded SAS port
Disk Enclosure Configurations Dual IOM3 (Input/Output Module) Controller modules
Power Supply/Cooling Fans Dual (SATA) or quadruple (SAS), redundant, hot-pluggable, integrated power supply/fan assemblies
Operating Temperature Range 41°F to 104°F - (5°C to 40°C)
Nonoperating Temperature Range 34°F to 122°F - (1°C to 50°C)
Relative Humidity 20 to 80% noncondensing
Operating Acoustic Noise 6.6B LwA @ 20°C
Input power frequency, Hz (AC) 50 to 60
Dimensions (height/width/depth) 4 EIA U (7”, 17.8 cm)/19” IEC rack-compliant (19", 48.3 cm)/24" (61 cm)
Clearance Dimensions (front-cooling/rear-cooling and maintenance/front-maintenance) 6” (15.3cm)/12” (30.5cm)/25” (55.9cm)
Weight 110 lb (49.9 kg) fully loaded, 53.7 lbs (24.4 kb) without disk drives
 
FC = Fibre Channel; LVD = Low Voltage Differential. Visit http://www.netapp.com/solutions/data_protection_devices.html for current supported tape devices. Visit http://www.netapp.com/osn/info/config.html for current FC switch support.
 
NetApp Systems Cabinet
20A and 30A single-phase cabinets

20A Cabinet: Includes 4 power cords with NEMA L6-20 or IEC 309 or Australia AS/NZ53123-20 connectors

30A Cabinet: Includes 4 power cords with NEMA L6-30P or IEC 309




20A Cabinet: 1 FAS3100 chassis & 12 DS14-type shelves




30A Cabinet: 1 FAS3100 chassis & 12 DS-14 type shelves
AC Power 200 to 240VAC
Current 20A Cabinet - Maximum 32A total
30A Cabinet - Maximum 24A total
Dimensions (height/width/depth)
 78.75" (200 cm)/23.6" (60 cm)/37.4" (95 cm)
Min. Clearances
 48" (122 cm) front and rear
Shipping Height
 90.6" (230 cm)
Weight (empty)
 275 lb (125 kg)
 
FAS Controller and System Specifications Active/Active Configuration Single Controller Configuration
Controller Weight
 122 lb (55.3 kg) 95 lb (43.1 kg)
Controller Height
 10.2" (26 cm), fits into 6U space 10.24" (26 cm), fits into 6U space
Controller Width
 19" IEC rack-compliant (17.6", 44.7 cm)
Controller Depth
 24.3" (61.7 cm), 28" (71.1 cm) with cable management bracket
Operating Temperature, Altitude, and Relative Humidity
 10° C to 40° C (50° F to 104° F); at </= 3,000 m (at </= 10,000' feet) elevation; 20% to 80% relative humidity, non-condensing (28° C wet bulb temperature)
Non-operating Temperature and Relative Humidity
 -40° C to 70° C (-40° F to 158° F); 5% to 95% relative humidity, non-condensing, in original container
Operating Acoustic Noise
 ≤ 61 dBA sound pressure (LpA) @ normal operating conditions (at 22°C and at sea level)
Min. Cabinet Clearances for Airflow
 10" (25.4 cm) in front, 12" (30.5 cm) in rear
Min. Cabinet Clearances for Service
30" (76.2 cm ) in front, 30" (76.2 cm) in rear
Compliance
 RoHS-compliant
Safety/Emissions/Immunity
 Safety: EN 60950, CE, CSA 60950, UL 60950, CB IEC60950-1 (all national deviations), EN60825-1, GOST-R

Emissions/Immunity: FCC Part 15 Class A, ICES-03, CE, BCC, VCCI, AS/NZS CISPR 22, EN55022, EN55024, EN61000-3-2, EN61000-3-3
 
FAS3100 System Power Specifications
Model Input Voltage  
Active/Active
Single Controller
Typical
 Maximum
Typical
 Maximum
One Side
Both Sides
One Side
Both Sides
FAS3140 100-120VAC Current, A 2.99 5.97 7.38 1.89 3.77 3.98
Power, W 297 594 736 187 373 396
Thermal, BTU/hr 1013 2026 2509 636 1272 1350
200-240VAC Current, A 1.49 2.98 3.6 0.97 1.93 1.97
Power, W 291 581 712 183 366 385
Thermal, BTU/hr 991 1981 2427 625 1249 1313
FAS3160 100-120VAC Current, A 4.07 8.14 9.74 2.37 4.74 5.07
Power, W 405 810 969 235 470 505
Thermal, BTU/hr 1381 2761 3305 801 1602 1722
200-240VAC Current, A 2.02 4.03 4.69 1.19 2.38 2.52
Power, W 394 778 930 230 459 493
Thermal, BTU/hr 1343 2686 3170 782 1564 1680
FAS3170 100-120VAC Current, A 4.07 8.14 9.74 2.37 4.74 5.07
Power, W 405 810 969 235 470 505
Thermal, BTU/hr 1381 2761 3305 801 1602 1722
200-240VAC Current, A 2.02 4.03 4.69 1.19 2.38 2.52
Power, W 394 778 930 230 459 493
Thermal, BTU/hr 1343 2686 3170 782 1564 1680
 
 
FC and FCoE Switch Support
NetApp offers broad support for FC and FCoE switches. A list of switches available through NetApp can be found here. For the complete list of supported switches, please consult the interoperability matrix found on the NetApp support site. Login access is required.