FAS2000

+1-877-263-8277  Email us
Overview Tech Specs Compare Software Packs
 

FAS2000 Series Technical Specifications

  Share    


View specifications for:
Technical Highlights
SAN Protocol Support Fibre Channel Protocol (FCP) for SCSI (4/2/1Gb); fabric-attached and direct-attached; IP SAN (iSCSI); Fibre channel over Ethernet (FCoE)
Network Protocol Support NFS V2/V3/V4 over UDP or TCP, PCNFSD V1/V2 for (PC) NFS client authentication, Microsoft® CIFS, HTTP 1.0, HTTP 1.1 virtual hosts
LUNs Up to 1,024
FlexVol® Volumes Up to 200 per controller on FAS2020 and FAS2040. Up to 500 per controller on FAS2050.
Snapshot™ Copies Up to 51,000 per controller on FAS2020 and FAS2040. Up to 127,000 per controller on FAS2050.
Number of Supported Hosts Up to 2 ports per controller configured as front-end (host) connectivity ports
Up to 4 directly connected servers per active/active configuration
Up to 24 SAN host connected servers on FAS2020. Up to 32 SAN host connected servers on FAS2040 and FAS2050.
Supported Configurations Controller Configurations
Single controller, active/active controller with clustered failover (CFO)1
Back-End (Disk) Configurations
Dual-path, multipath HA storage (PDF)
Reliability Redundant hot-swappable controllers, cooling fans and power supplies
Management Full-duplex 10/100 Base-T Ethernet onboard console, diagnostic LED, Maintenance Center, SNMP, telnet, SSH, HTTP, Web (SSL), host scripting, e-mail alerts
Security Virus protection, SecureAdmin, IPSec, CHAP authentication, role-based access control (RBAC)
 
Maximum RAID Group and Aggregate Sizes
FAS2050
FAS2040
FAS20202
  FC or SAS SATA FC or SAS SATA FC or SAS5 SATA
RAID 6 (RAID-DP™) 28 (26 data disks plus 2 parity disks) 16 (14 data disks plus 2 parity disks) 28 (26 data disks plus 2 parity disks) 16 (14 data disks plus 2 parity disks) 28 (26 data disks plus 2 parity disks) 16 (14 data disks plus 2 parity disks)
RAID 43 14 (13 data disks plus 1 parity disk) SATA: 7 (6 data disks plus 1 parity disk) 14 (13 data disks plus 1 parity disk) SATA: 7 (6 data disks plus 1 parity disk) 8 (7 data disks plus 1 parity disk) SATA: 14 (13 data disks plus 1 parity disk)
SyncMirror® (High Resiliency RAID 1) Options:
  (1) RAID-DP + RAID 1
  (2) RAID 4 + RAID 1		 FC Expansion Yes FC Expansion Yes FC Expansion Yes
Volume/Aggregate 16TB 16TB 16TB 16TB 8TB 8TB
 
Scalability
FAS2050
FAS2040
FAS2020
  Active/Active Configuration Single Controller Active/Active Configuration Single Controller Active/Active Configuration Single Controller
Max. Raw Capacity4 104TB 104TB 136TB 136TB 68TB 68TB
Max. Number of Internal Disk Drives 20 20 12 12 12 12
Max. Number of Expansion Disk Drives 84 84 124 124 56 56
Max. Number of Total Disk Drives (Internal + External) 104 104 136 136 68 68
Max. Drives per Back-End (Disk) FC Loop 84 84 84 84 56 56
ECC Memory 4GB 2GB 8GB 4GB 2GB 1GB
1 For more information about cluster configurations, refer to http://now.netapp.com/NOW/knowledge/docs/hardware/NetApp/syscfg/.
2 1) Max. capacity is derived based on the type, size, and number of the drives.
   2) Max. capacity is calculated using Base10 arithmetic (1TB = 1012 bytes).
3 RAID 6 is the recommended configuration for drives greater than 144GB.
4 Maximum capacity is calculated using Base10 arithmetic (1TB = 1012 bytes).
5 Minimum software requirement of Data ONTAP 7.3.1.1 for FAS2020
 
Onboard I/O
FA2050
FAS2040
FAS2020
  Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller
Onboard Fibre Channel Ports (target or initiator) 4 ports of 1, 2,
or 4Gb
(auto sensing)		 2 ports of 1, 2,
or 4Gb
(auto sensing)		 4 ports of 1, 2,
or 4Gb
(auto sensing)		 2 ports of 1, 2,
or 4Gb
(auto sensing)		 4 ports of 1, 2, or 4Gb
(auto sensing)		 2 ports of 1, 2, or 4Gb
(auto sensing)
Onboard GbE Ports 4 2 8 4 4 2
Modular I/O Slots 2 1 - - - -
Onboard SAS Ports - - 2 1 - -
 
I/O Card Support
FA2050
FAS2040
FAS2020
  Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller		 Active/Active
Configuration		 Single
Controller
Dual port 4Gb FC Disk Adapter (max.) 2 1 - - - -
Dual port 4Gb FC Tape Adapter (max.) 2 1 - - - -
Dual port FCoE Target Adapter (max.) 2 1 - - - -
Dual port GbE (copper or fiber) (max.) 2 1 - - - -
Quad port 4Gb FC Disk/Tape Adapter (max.) 2 1 - - - -
2-port Ultra320 SCSI Tape Adapter (max) 2 1 - - - -
2-port 1Gb iSCSI (copper or fiber) Adapter (max) 2 1 - - - -
Dual port 8Gb FC Disk Adapter (max.) 2 1 - - - -
 
Software
Operating System NetApp Data ONTAP®
Operating Systems Supported Windows® 2000, Windows Server 2003, Windows XP, Linux®, Sun™ Solaris™, AIX, HP-UX, Mac® OS, VMware ESX
Software Features Standard
Snapshot
FlexVol®
Thin Provisioning
RAID-DP
FlexShare®
Deduplication
Operations Manager
NearStore®
SyncMirror®
System Manager
FilerView®
FC protocol
iSCSI protocol
CIFS (included in select FAS2020 preconfigured systems)
NFS (included in select FAS2020 preconfigured FAS2020)
HTTP protocol
DNS
NDMP
NIS
FlexCache®
Maintenance Center


 Foundation Pack
SnapRestore®
SnapVault® Primary
Provisioning Manager

Protection Pack
SnapMirror®
SnapVault Secondary
Protection Manager

Application Pack
SnapManager® (for Microsoft® Exchange, Microsoft SharePoint® Server, Microsoft SQL Server®, Oracle®, SAP®, Virtual Infrastructure)
SnapDrive® (for Windows®, UNIX®)
Single Mailbox Recovery
NetApp DSM

Server Pack
SnapManager for Virtual Infrastructure
SnapDrive (for Windows®, UNIX®)
NetApp DSM

Advanced Pack
FlexClone®
MultiStore®
SnapLock® Compliance
SnapLock Enterprise
5 For more information about available FAS2000 software, refer to http://www.netapp.com/us/products/storage-systems/fas2000/fas2000-software-packs.html
 
Storage Specifications
Disk Shelves Supported (Fibre Channel, SATA, SAS) DS14mk4 FC, DS14mk2 FC, DS14mk2AT
Each w/14 low-profile slots for FC and SATA disk drives

DS4243
With 24 slots for SAS or SATA disk drives
Disk Drive Support Disks Supported on New Configurations
SAS: 300GB disks, 450GB
FC: 300GB disks, 450 GB disks
Internal SATA: 500GB, 1TB disks
External SATA: 500GB, 1TB disks

Disks Supported for Legacy (Controller Upgrade) Configurations
FC: 36GB, 72GB, 144GB, 300GB, 450GB disks
SATA: 250GB, 320GB, 500GB disks, 1TB disks
Disk Shelf Support Shelves Supported on New Configurations
Embedded Switched Hub4 (ESH4)
AT-FCX

Shelves Supported for Legacy (Controller Upgrade) Configurations
Embedded Switched Hub2 (ESH2)
AT-FCX
Internal Disk Drive Storage Interface Serial Attached SCSI (SAS)
Disk Drive Storage Shelf Interface Fibre Channel-Arbitrated Loop (FC-AL)
Power Supply/Cooling Fans Dual, redundant, hot-pluggable, integrated power supply/fan assemblies (220V/110V)
AC Power/Max. Current 100 to 120VAC/3.95A; 200 to 240VAC/1.9A
Thermal Rating 1,167 Btu/hr (fully loaded shelf)
Operating Acoustic Noise 58 dBA sound pressure (LpA) @ normal operating conditions (at 23°C and at sea level)
Dimensions (height/width/depth) 3 EIA U (5.25", 13.3 cm)/19" IEC rack-compliant (17.6", 44.7 cm)/20" (50.85 cm)
Weight 77 lb (35 kg) fully loaded
 
FC Switch Support - Tape/SAN
Vendor Model
Brocade Silkworm 2400/2800 (TapeSAN only)
Brocade Silkworm 3200/3250/3800/3850/3900/4100/12000/24000/200E
McData ES 3016/3032, Intrepid 6064/6140/ED-5000, Sphereon 3216/3232/4300/4400/4500/4700
Cisco MDS 9120/9140/9216/9506/9509/9513
FC = Fibre Channel; LVD = Low Voltage Differential; visit www.netapp.com/us/solutions/a-z/data-protection-devices.html for current supported tape devices.
 
NetApp Systems Cabinet
20A and 30A single phase cabinets.

20A cabinet: Includes 4 power cords with NEMA L6-20 or IEC 309 or Australia AS/NZ53123-20 connectors

30A cabinet: Includes 2 power cords with NEMA L6-30 or IEC 309 connectors
20A cabinet: controller and up to 6 DS-14 shelves


30A cabinet: controller and up to 6 DS-14 shelves
AC Power 200 to 240VAC
Current Redundant power
20A cabinet: maximum 32A total
30A cabinet: maximum 24A total
Dimensions (height/width/depth) 78.75" (200 cm)/23.6" (60 cm)/37.4" (95 cm)
Min. Clearances 48" (122 cm) front and rear
Shipping Height 90.6" (230 cm)
Weight (empty) 275 lb (125 kg)
 
System Specifications FAS2050 FAS2040 FAS2020
AC Power/Current (line voltage for standalone systems dependent on local power distribution; system cabinets are 200 to 240VAC only) 88 to 264VAC, 11 to 6A, 50/60Hz 88 to 264VAC, 9 to 4.5A, 50/60Hz 88 to 264VAC, 9 to 4.5A, 50/60Hz
Weight (fully loaded) 110 lb (50 kg) 66 lbs (29.9kg) 66 lbs (29.9kg)
Height 6.9" (17.5 cm), fits into 4U space 3.45" (8.76 cm), fits into 2U space 3.45" (8.76 cm), fits into 2U space
Width 19" IEC rack-compliant (17.6", 44.9 cm)
Depth 24" (61 cm)
Operating Temperature, Altitude, and Relative Humidity 10° C to 40° C (50° F to 104° F); at </= 3,000 m (at </= 10,000') elevation; 20% to 80% relative humidity, non condensing (28° C wet bulb temperature)
Non operating Temperature and Relative Humidity -40° C to 70° C (-40° F to 158° F); 8% to 80% relative humidity, non condensing, in original container
Operating Acoustic Noise ≤ 60 dBA sound pressure (LpA) @ normal operating conditions (at 23°C and at sea level)
Min. Cabinet Clearances for Airflow 25.4 cm (10 in) in front, 30.5 cm (12 in) in rear
Min. Cabinet Clearances for Service 76.2 cm (30 in) in front, 76.2 cm (30 in) in rear
Compliance RoHS-compliant (PDF)
Safety/Emissions/Immunity Safety: EN 60950, CE, CSA 60950, UL 60950, CB IEC60950-1 (all national deviations), EN60825-1, GOST-R, BSMI CNS14336, CCC GB 4943-2001, SABS, S Resolution 92-98
Emissions/Immunity: FCC Part 15 Class A, ICES-003, CE, MIC, VCCI, AS/NZS CISPR 22, EN55022, EN55024, IEC61000-3-2, IEC61000-3-3, CoC (South Africa), BSMI, KN22
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11, KN24, CISPR 24
 
FAS2000 System Power Specifications
Model Input Voltage Active/Active Single Controller
Typical Maximum Typical Maximum
One Side Both Sides One Side Both Sides
FAS2020
no drives		 100-120VAC Current, A 1.12 2.23 2.34 0.8 1.6 1.67
Power, W 108 215 229 77 153 165
Thermal, BTU/hr 366 731 780 261 521 563
200-240VAC Current, A 0.6 1.18 1.2 0.45 0.89 0.9
Power, W 104 208 221 75 149 160
Thermal, BTU/hr 355 709 754 253 506 544
FAS2020
12x144GB SAS drives		 100-120VAC Current, A 2.05 4.09 4.69 1.7 3.39 3.83
Power, W 200 400 464 165 330 377
Thermal, BTU/hr 683 1365 1583 563 1125 1287
200-240VAC Current, A 1.11 2.22 2.34 0.94 1.87 1.94
Power, W 210 419 452 174 348 371
Thermal, BTU/hr 715 1429 1542 593 1185 1264
FAS2020
12x300GB SAS drives		 100-120VAC Current, A 2.38 4.75 4.94 1.95 3.89 4.44
Power, W 233 465 488 191 381 439
Thermal, BTU/hr 794 1587 1665 649 1298 1497
200-240VAC Current, A 1.19 2.37 2.45 1.08 2.16 2.23
Power, W 224 448 476 204 407 431
Thermal, BTU/hr 764 1527 1624 694 1388 1470
FAS2040 no drives 100-120VAC Current, A .98 1.95 1.96 .7 1.4 1.4
Power, W 94 187 192 67 133 137
Thermal, BTU/hr 319 638 655 227 454 467
200-240VAC Current, A .52 1.04 1.02 .391 .78 .77
Power, W 91 182 188 651 130 134
Thermal, BTU/hr 311 621 641 222 443 457
FAS2040 12x300GB SAS drives 100-120VAC Current, A 2.33 4.66 4.85 1.98 3.96 4.08
Power, W 229 457 480 194 387 404
Thermal, BTU/hr 779 1558 1637 660 1320 1378
200-240VAC Current, A 1.18 2.35 2.39 1 2 2.03
Power, W 224 447 464 189 378 392
Thermal, BTU/hr 762 1524 1582 645 1289 1337
FAS2050
no drives		 100-120VAC Current, A 1.19 2.37 2.62 0.9 1.8 2.33
Power, W 114 227 256 87 173 222
Thermal, BTU/hr 387 773 874 295 589 758
200-240VAC Current, A 0.62 1.24 1.35 0.5 0.99 1.23
Power, W 111 222 250 108 168 217
Thermal, BTU/hr 379 758 851 287 574 739
FAS2050
20x144GB SAS drives		 100-120VAC Current, A 2.84 5.68 6.31 2.38 4.76 5.64
Power, W 279 558 628 233 465 560
Thermal, BTU/hr 951 1902 2142 794 1587 1909
200-240VAC Current, A 1.45 2.89 3.09 1.33 2.65 2.82
Power, W 225 550 600 251 502 547
Thermal, BTU/hr 938 1876 2044 855 1710 1864
FAS2050
20x300GB SAS drives		 100-120VAC Current, A 3.34 6.68 7.51 2.96 5.92 6.62
Power, W 330 659 747 292 583 658
Thermal, BTU/hr 1124 2247 2547 994 1988 2243
200-240VAC Current, A 1.71 3.41 3.73 1.38 2.76 3.27
Power, W 328 655 728 262 523 636
Thermal, BTU/hr 1116 2232 2483 891 1782 2168