See technical specifications that include the NetApp V6210, V6240, V4280 and V3270, V3250, V3220.
View specifications for:
| Specification |
V6220 |
V6250 |
V6290 |
| General Specifications |
Refer to specifications for the corresponding FAS model at this location:
FAS6200 Tech Specs
|
| Maximum System Capacity |
4,800TB |
5,760TB |
5,760TB |
| Max # of LUNs and NetApp Drives[1] |
1,200 |
1,440 |
1,440 |
| Supported Storage Arrays |
Selected FC-SAN storage arrays from EMC, HP, HDS, IBM, Fujitsu NetApp E5400 Data Storage System (V-Series running Data ONTAP 8.1.2P2 7-Mode) |
| Supported NetApp Disk Shelves |
DS2246, DS4243, DS4246, DS4486 |
| RAID Support |
Attached storage arrays: Data protection must be provided using RAID that is native to the storage array. V-Series will stripe (RAID 0) across storage array LUNS for performance only.
NetApp disk drives: RAID 4, RAID-DP, RAID 4 + SyncMirror (RAID 1), RAID-DP + SyncMirror |
| Specification
[1] |
V3220 |
V3250 |
| General Specifications |
Refer to specifications for the corresponding FAS model at this location:
FAS3200 Tech Specs
|
| Maximum System Capacity |
1,920TB |
2,880TB |
| Max # of LUNs and NetApp Drives[1] |
480 |
720 |
| Supported Storage Arrays |
Selected FC-SAN storage arrays from EMC, HP, HDS, IBM, Fujitsu NetApp E5400 Data Storage System (V-Series running Data ONTAP 8.1.2P2 7-Mode), |
| Supported NetApp Disk Shelves |
DS2246, DS4243, DS4246, DS4486 |
| RAID Support |
Attached storage arrays: Data protection must be provided using RAID that is native to the storage array. V-Series will stripe (RAID 0) across storage array LUNS for performance only.
NetApp disk drives: RAID 4, RAID-DP, RAID 4 + SyncMirror (RAID 1), RAID-DP + SyncMirror |
| Switch Vendors |
Brocade, Cisco
See the V-Series Support Matrix for a current listing of
supported switch models and configurations. [2]
support.netapp.com/matrix/
|
Maximum includes both LUNs provisioned from storage arrays to the V-Series controllers plus attached NetApp disk drives if combined in the same system.
Access to the NetApp Interoperability Matrix Tool (IMT) is limited to NetApp employees, partners and existing customers.